“In Boston Scientific, we value our people, planet, and property; which fall under EHS compliance. Antaris have been a partner with Boston Scientific for several years, and have enabled us as a company to achieve high standards in our compliance programmes.
Antaris is instrumental in assisting Boston Scientific Clonmel in achieving and maintaining our accreditation’s ISO 14001, ISO 50001, and more recently, ISO 45001.
Antaris provide consultancy and training which is tailored to meet our needs. Antaris consultants understand our business needs. We at Boston Scientific value the partnership we have had with Antaris over the past several years.”
Kieran Thompson, EHS Manager, Boston Scientific (Clonmel)
“Hollister Ballina have utilised Antaris for site specific workshop modules and found the quality and content of their presentations/workshops to be of a high level, reflected in participants’ feedback.”
Jonathan Kelly, EHS Engineer, Hollister (Ballina)
“Crane Worldwide Logistics have had an association with Antaris for several years, in which we have received ongoing support in relation to relevant ISO, AEO and internal client audits.
The professional service and value Antaris have brought to our organisation has been incredible. Their practical guidance, customer focused approach and professional attitude enabled us to achieve our objectives and ensuring we maintain excellent service to our clients.”
Chris Deans, Managing Director, Ireland, Crane Worldwide Logistics Irl Ltd
“Archaeological Management Solutions have availed of Antaris’ services for the past two years and have found them to be extremely professional and punctual regarding deadlines.
Antaris provided fantastic support in guiding us through the process of achieving ISO 9001, ISO 14001, and ISO 45001 and have continued to provide support through our use of Antaris has also provided tailored training to meet the needs of our business.”
Ed Danaher, Consultant Archaeologist, Archaeological Management Solutions (AMS)
“GNI have used the services of Antaris for more than ten years and have always found them supportive, informative and professional. They have supported us in the development of our integrated management system, auditor training requirements, and supported us in developing an effective document management system.”
Tadhg Kelly, Management Systems Manager, Gas Networks Ireland
“We have worked with Antaris for a number of years and have always found them to be very knowledgeable, professional and informative in areas of quality, food safety, health & safety and environmental. Antaris have helped us to achieve and maintain our ISO management standards and have provided a high standard of training, for example for internal auditors.”
Sheila Kenny, Quality Assurance Manager, Irish Distillers Pernod Ricard
“Dublin Bus has worked for several years with Antaris. We use their consultancy services for our QEHSES Management Systems – Quality, Environmental, Health & Safety, Energy and Sustainability – via gap analysis and internal audits as per the ISO standards. We also use their expertise in delivering training in many areas, especially in management. Their auditors are exceptional with a focus on continuous improvement and lean/six-sigma ideas to improve our procedures and processes better.”
Rafael Bernardes, Quality Management Executive, Dublin Bus (Bus Átha Cliath)
“Control Equipment Limited works with Antaris in the provision, management and auditing of our EMS and have found them to be a fantastic asset to our company for the past number of years. They take a professional and knowledgeable approach, delivering high quality results, and we rate their service and expertise highly. They have spent several decades in the industry, and it shows.”
Liam Williams, Procurement Manager, Control Equipment Limited (CEL)
“We have been using the services of Antaris for many years and have found them to be very professional, competent and totally customer focused.”
Sarah Hayes, Operational & Quality Support, Statkraft Asset Management
“Euram Air Leases Ireland Ltd contracted with Antaris Consulting to carry out a scope of work and we are very happy with the results.
The consultant met with management to discuss our requirements and explained in great detail what would be required of Euram to attain AEO status displaying a very knowledgeable and efficient demeanour.
The necessary information was gathered and most of the work was completed off site and any queries we had were dealt with in a timely manner. When onsite work was necessary there was very little disruption to the regular workflow and all duties were performed in friendly and professional manner.
The consultant was on-site when the AEO audit was carried out to answer any questions that arose.
All in all it was a very positive experience.”
John Odlum, Managing Director, Euram Air Leases (IRE) LTD
“We use Antaris to help us comply with the vast regulations regarding health and safety in the workplace. In addition to this Antaris help us with different aspects of our management systems, including audits, inspections and procedures.”
Richard Meaney, Health & Safety Officer, Cara Partners
“Ei Electronics has worked for many years with Antaris and have always found them to be very professional, innovative and informative in all areas of quality, environmental and health & safety. From training to consultancy, Antaris has helped us with achieving compliance to the relevant ISO management standards.”
Paul Kilbridge, NPI & Manufacturing Manager, EI Electronics
“We have had a strong relationship with Antaris for over a decade and have availed of their professional consultancy and training services. They have always been reliable, cost-effective, flexible and practical.”
Tom Costelloe, Quality Manager, NSAI
“Thermo King, Galway have had an association with Antaris for several years. in which we have received ongoing support in relation to relevant EH&S legislation. We have found this support to be of great value in complying with the relevant EH&S legislation and also satisfying the requirements of our external auditors for ISO 14001 certification.”
Michelle Nolan, Health & Safety Officer, Thermoking